Macros in the ProConnect NVR are "if / then" programming functions that can be used to automate certain alert and reporting features of the NVR. They can be used for AvertX Connect alert and push noti …

External power-over-ethernet (PoE) switches can be used with the ProConnect A800(+), ProConnect A1600(+), and ProConnect Summit NVR models.  The built-in PoE ports on the NVR are numbered an …

Before starting, confirm that the date in the camera's administrative user interface (UI) is accurate.  Check the "Sync with computer time" box, even if it’s already synced: Setup A …

To access the motion settings of the camera When you login to NVR from a computer browser, you will see several icons at the top right hand side of the screen. Please click on the Gear icon to e …

Image adjustment settings can be accessed through the Camera Setup menu in your ProConnect NVR. To access the image controls: Click on the Setup tab, then the Cameras button. In the Cameras list …

ProConnect software allows recording up to the maximum frame rate of the camera. For example, if a camera can record 20 fps, only 1-20 will be displayed in the Frames Per Second dropdown menu. How …

Download the AvertX Camera Finder/Network Camera Manager and install it on the computer.From the Performance Series NVR (PS) NVR, determine the port you wish to use for the camera, go the NVR Set …

Click on Setup > System Settings > Cameras to view a list of cameras.  The respective IP addresses are beside the camera on the main Camera List.  Once you've clicked on a camera, …

You can use either the HDMI port located on the back of the Recorder, or you can use the VGA display port if your TV supports this. Supported Resolutions: 1024x768, 1280x1024, 720P, 1080P …

To access your recorder from outside your local network, the recorder needs a static IP address. Most internet providers do not supply this, but AvertX provides you with a free service to solve this p …