​Manually adding a camera to a ProConnect NVR

Cameras can be manually added to the ProConnect NVR if they don't automatically load several minutes after they're connected to the NVR's camera ports.

  1. Click Setup (Gear Icon when using a web browser user interface).

  2. Select Cameras under System Settings
  3. Confirm the target camera isn't already listed in the Camera List.
  4. Click Add Cameras.

  5. On the Add Cameras page, click the Manual tab.
  6. Enter the appropriate connection information including Protocol, IP Address, Port, Manufacturer, Model, Username, Password, and Camera Name.
  7. Click Save or Save and Add New to add another camera.