Adding Legacy Cameras to ProConnect NVRs
AvertX legacy cameras are those developed for recorders produced before the ProConnect network video recorder (NVR), which is compatible with all AvertX cameras.The ProConnect automatic
…
Frequently Asked Questions
Search
To view FAQ results, please select the "FAQs and Pages" tab on the search results. If you can not find an answer in the FAQs or the product manual, contact our Pro Team Support.
What are the Specs of AvertX Cameras?
AvertX camera comparison specifications chart for the 4K-capable HD438, HD448, HD458 bullet-style cameras, and the 4K-capable HD119 (360), HD838, and HD848 dome-style cameras.Refer to this FAQ to b
…
How do I trigger a camera to start recording & trigger an event and email notification when a sensor is activated?
This guide explains how to set up your recorder to record when sensors are activated.
To trigger a camera to start recording during an event where a sensor is activated, you will first need to ma
…
Troubleshooting Complex Night Time Camera Images
This FAQ guides you through use of evaluative metering boxes to correct problems with night time images from cameras.
Poor nighttime performance can quite often be easily corrected when you apply
…
How Do I Adjust My Camera’s Picture Settings In Proconnect?
Image adjustment settings can be accessed through the Camera Setup menu in your ProConnect NVR. To access the image controls:
Click on the Setup tab, then the Cameras button.
In the Cameras list
…
What is Pixels Per Foot?
In an open field of view, a security camera can technically see forever. How far away from a camera you can get usable video is another matter. Whether or not a person is readily identifiable or just
…
How do I configure a ProConnect camera (HD420, HD820 and HD920) to Performance Series NVRs (without a separate external PoE switch)?
Download the AvertX Camera Finder/Network Camera Manager and install it on the computer.From the Performance Series NVR (PS) NVR, determine the port you wish to use for the camera, go the NVR Set
…
What microSD card can I use in my cameras?
Note: This FAQ only applies to the following cameras: HD30, HD300, HD310, HD40, HD80, HD810 and HD90. Other cameras have newer hardware and higher capacities. Check your camera's specifications doc
…
Is my HD80IRM Rev B/HD40IR Rev B camera 2MP or 3MP?
The HD80IRM dome camera and the HD40IR bullet camera are available in two different models. The original model, model names HD80IRM & HD40IR, are 2MP (1080p) resolution cameras. The newer models of th
…
How do I update the firmware on my AvertX camera?
Download the camera firmware file to a computer and then unzip or extract the file.Access your camera through a web browser. Type the IP address of your camera in the address bar or see how to Acces
…
How do I reset the camera to factory default? Where is the camera reset button located?
If the camera is not communicating properly with the recorder, it may need to be manually reset to factory defaults using the physical reset button (see pictures below for reset button location):
Ens
…
How do I enable recording to a microSD card on my Legacy cameras?
Current AvertX legacy camera models are: HD30, HD40, HD90, HD80, HD300, HD310, HD320, HD510, HD810, HD712, HD7022AvertX legacy cameras include the option to record video to an internal micr
…
How do I focus my AvertX HD90 camera?
For optimal image quality, you will need to manually focus your AvertX camera once it has been installed. Please use the following instructions to focus your AvertX HD90 Night Vision HD Indoor/Outdoor
…
How do I focus my AvertX HD30 camera?
For optimal image quality, you will need to manually focus your AvertX camera once it has been installed. Please use the following instructions to focus your AvertX HD30 HD Indoor/Outdoor Micro Dom
…
