How Do I Setup an AvertX Connect Account on a ProConnect NVR?

The steps to setup and link the NVR to the connect.avertx.com website:

  1. Register for an account at the following website: https://connect.avertx.com/
  2. Add the login information to the NVR to link it to your account:
  3. If it is linked already it should show a device id instead:

  4. login to your connect.avertx.com account it should appear on the recorders page:
  5. If it doesn’t then run the network diagnostics, you should get 6 green check marks:

    If the relay fails, then you need to set a static ip for the internet NIC card using googles DNS 8.8.8.8 and 8.8.4.4

  6. Reboot the NVR from the following menu. Setup > Power Options > restart.